Or drivers to install Windows, then do not
The Norton AntiVirus software to boot up into Windows again, it is not already. Problems like this are quite common. May be due to home computer users. Most commonly used illegal products sold by IT department. Sometime in the process of producing non-standard CD to copy some files are missing. In particular, the CD-ROM discs. Included are dozens of such programs. Quite a lot.Windows can not access them. Another reason for the driver because of it. Some drivers also have problems with your operating system and interfere with the file. Windows system to crash, it has been suggested. For ways to solve problems. The computer technician. Behavior, ask the user first. If you already have installed. The driver was later made into a longer boot into Windows. Presumed to be caused by the software and drivers may not be complete until the system is not bootable. We can solve the problem.To boot into Safe Mode, because entering Safe Mode to access Windows without. Need some drivers or files. Then we can remove the program or driver that caused the problem to be depleted from the rest of it remains. Then boot into Windows normally.
I can not boot up Windows
If the computer has passed the POST, but to hold the Windows logo screen, making it unable to boot into Windows. Sometimes it does not display the Windows logo, but a message comes up saying "Missing Operation System".
Solutions for the computer technician. Behavior, ask the user before. I have to delete some system files to it. Most of the problems it caused COMMAND.COM system files are damaged or deleted due to the COMMAND.COM file is a file that is responsible for keeping order within the system such as DOS, TYPE, COPY, DIR, DEL is not. acts. The user interface and command of the keyboard. The command to work. The COMMAND.COM file, which is critical to the operating system to be based on the DOS.
How it is. To boot with the Startup Disk, then type the command SYS C:, the command Copy files to drive C: by the file system will be included with the COMMAND.COM file, and then boot up again, this time to find that I can boot into Windows
Error message 1: This program has performed anillegal operation and will be shut down. If the problem persists, contact the program vendor.
This suggests that some of the problems that we have to sit out the last time the program is what. Then removed by Add / Remove Program in Control Panel, then reinstall it. It is recommended that the program used to install the new. If the disc is probably the same again. Some of the files after you have installed the program files installed earlier. When reinstalled, it may have been the same should be resolved by updating to the new version.
Error messages 2: Improper shut down detected, Checking disk for errore.
This error message indicates that the problem is in the process of shutting down. May be due to improper shutdown. The system is shut down. Solution is to wait, then press Esc, it will return to normal, so if you do not want this happening again. After this, it should shut down the computer properly with the shut down before it.
Error message 3: Warning Windows has detected a Registry / configuration error. Choose Safe mode to start Windows with minimal set of drivers.
This message indicates that an error in the Windows registry problems. The Windows operating system into Safe mode will allow us to solve the problem. For solving this problem is quite serious and quite vulnerable. Because the registry is a database that stores information and settings of the window. If there are problems in this section. Requires careful editing. Otherwise it may cause the system to crash. To solve that problem by installing a new Windows registry to allow it to overwrite the old registry. Or boot with a boot to command Scanreg / restore to return to the Windows registry, backup and storage for 5 days, then we think that the problem does not occur. That's all it takes to solve a problem (in this way do not forget to back up any important data. The first one).
I get the wrong message 4: Explorer has caused an error in Kermel132.dll.
This message indicates that the error in the file system. Kernel132.dll. The user may not be in the Control panel has most likely occurred on a Windows Me workaround is to reboot the computer, then go.
Safe Mode, then follow the steps below.
A., Search for files with the extension *. Cpl by the search program, Search, For Files Or Folders.
Two. On the file. Cpl include the WINDOWS \ SYSTEM. Change the file extension. Old files were then tested to see if he has been the Control panel. No, go back to a different file. Until completion. When successful, then we can know that the files would cause problems.
Three. To change the file extension to file the return is the same. The file is the cause. Then boot up.
Error message 5: The selected disk drive is not in use. Check to make sure a disk is inserted.
This message indicates that the disk drive does not work. Please make sure that the disc is inserted into the disk drive. This problem can be caused by the user forgets to put the disc into the disc drive, but you have to insert it, this problem may be caused by a disk or a disk drive has a problem. We can not use the disc to another machine, if available. It shows that the disk drive must be removed to repair or replace as new, it is possible to solve this problem.
Error message 6: There is not enough free memory to run this program. Quit one or more programs, and try again.
This message indicates that memory is not enough left in the open. The program then try to reopen it. For the cause of the problem is memory or RAM is not enough of it. A permanent solution (it is a waste of money) is to purchase and install additional RAM. The solution is temporary. We recommend that users use the program do not need to know. The program running in the background that we did not turn up for work. Notice from the System Tray, the icon of the program is to manage the close down or programs like RAM (Resource Leak) is a program that, even if they close it, it refused to return the memory Gulf deleted. into the system. We can check that the system we have. Resources at the right-click My Computer, then click the Performance tab of the System Resource to online resources as a percentage. If less than half to close the program and then reboot into the new program, they will return back to the same type.
Error message 7: Error Reading CD-ROM in Drive D: (or drive to a CD-ROM) Please insert CD-ROM XX With Serial Number XX in Drive d: ... if the CD-ROM is still the drive,. it may require cleaning.
This error message will come up that there was an error reading from the CD in the drive D: (or drive, a CD-ROM), which caused the user to press the Eject button for the CD-ROM output. before the window. I read it. How it is. To bring transparency to wait until it is read from the disk drive is then taken out. By the light of the CD-ROM drive. Should wait until the light stops blinking before. The reason for this may be the result of the use of the CD does not work I put into it. The CD is dirty or the CD drive. Unable to read data. Should come out clean before I go back again.
Error message 8:-0x0000007B INACCESSIBLE_BOOT_DEVICE.
This error message is prompted by the error code number is an error. This means that the computer can not find the partition. As the boot partition or boot sector of a given problem. We try to solve the problem by booting the system again. If it still does not take the Startup boot up instead, use Scandisk to repair.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น